|
Graphilor Cylindrical Block Heat Exchanger Data
- EXPLANATION of Typical Model Number - Example Model 2430-5 broken down as follows :
- 24 = Diameter of graphite core. In this example, 24" diameter graphite core. Other options,
12", 16" and 30"
- 3 = Number of equivalent 14 " sections in heat transfer core. In this example, 3 cylinder
sections. Available - 1 to 7 sections.
- 0-5 = Diameter of process holes. In this example, 1/2" diameter process holes. Other options
- 3/8" (0-38) and 3/4" (0-75).
| |
+ Applications for Models with 3/8" Process Holes:
- Use for heating, cooling and condensing.
- For maximum heat transfer area per shell size.
- Maximum allowable working pressure - 100 PSIG process side and 100 PSIG
service side.
|
| |
+ Applications for Models with 1/2" Process Holes:
- Use for heating, cooling and condensing.
- Larger hole size where potential fouling may exist.
- Maximum allowable working pressure - 100 PSIG process side and 100 PSIG
service side.
|
| |
+ Applications for Models with 3/4" Process Holes:
- Use for evaporation and condensing.
- Affords more cross-sectional flow area where pressure drop may be a problem.
- Maximum allowable working pressure - 100 PSIG process side and 100 PSIG
service side.
|
- DESIGN OPTIONS :
|
Graphite Heat Exchangers