Chemical Equipment Division
Groupe
Groupe
 
Version Plan du Site
    Graphite Heat Exchangers     Graphite Rupture Discs
- Cubic Block
- Shell and Tube
 -Cylindrical Block
- PolyblocŪ
- Polybloc IIŪ
- Flue Gas
Introduction  - Data  - 3/8" Proc. Holes  - 1/2" Proc. Holes  - 3/4" Proc. Holes

Graphite Heat Exchangers

Graphilor Cylindrical Block Heat Exchanger

The GRAPHILORŪ Cylindrical Block Heat Exchanger is the most versatile of the various graphite designs in that it is best suited for a wide varity of applications.

Because graphite in inherently weak in tension and strong in compression, the cylindrical heat exchanger, with it's axial spring compression principle, accomodates higher design pressures.

 
 

Important Features Are:

  • Solid drilled construction in multiples of 14" long sections; or single monolithic cores without cemented joints, up to 70" in length.
  • Excellent corrosion resistance to a wide variety of chemicals.
  • ASME code construction (lethal designation available).
  • Standard maximum allowable working pressures - 100 PSIG for both process and service sides. Higher allowable working pressures may be available. Please consult with Carbone Sales Engineering Department for further details.
  • No exposed graphite.
  • Alternating rows of process and service holes for maximum heat transfer.
  • Design temperature of 360° F. Can be exceeded for certain applications with water cooled heads.
  • All exchangers are hydrostatically tested at 1-1/2 times the MAWP on process and service sides prior to shipment.
  • All graphite components are pneumatically tested after resin impregnation for assurance of an impervious graphite structure.
  • The highest standards of quality control are maintained throughout the manufacturing process.
  • Compressed TFE gaskets between sections.
  • Horizontal or verticle supports.
  • Nozzle sizes are provided to suit application.
  • Installation, maintenance and operating instructions are available.